Enclosed Shower Installation Guide (Hinge Panel) GAP RANGE WALL - HINGE = 1/8” to 3/8” HINGE - DOOR = 1/8” to 13/64” HINGE PANEL 1/8” 1/8” DOOR - WALL = 1/8” to 13/64” DOOR PANEL 1/8”
BEFORE YOU START The most fragile parts of tempered glass panels are the corners. Therefore, it is critical you have the rubber blocks in place so the glass never touches the tile surface you are installing onto. Please make sure the glass is always on blocks while out of the packaging prior/during install. We have provided some rubber blocks as part of the install kit but you can use wood, cardboard or other rubber products to protect against breakage.
. Once you have completed the silicone, its critical you leave the silicone to set for 24-36 hours. Whilst the silicone is setting please leave the door panel off and hang once it has cured PART THREE – Install Door Panel 1. 2. 3. 4. Attach the hinges to the hinge panel. a. Ensure you have the hinges placed in the correct direction. The side of the hinge with the solid plate is attached to the hinge panel. The side with the screws of the hinges should be on the inside of the shower enclosure. b.