User Manual

Backpack Vacuum

Accessory Use

Round Brush

Used to clean furniture and seat surfaces.

Long Crevice Tool

Used to clean heat radiator, gaps, and corners.

How to Use the Machine

1. Connect the plug to the body socket (as shown in

the picture, the machine is designed with a power plug

protection lock to prevent the power plug from falling off due

to dragging) and connect the other end to the power supply.

2. Connect long floor brush (or large round brush, long flat

suction, dust brush), stainless steel elbow and hose.

3. Properly secure shoulder straps and belts.

4. Warning: If the belt and shoulder strap are not secured,

the machine may fall off and cause injury.

5. Press the power switch button on the body to open the

machine.

Clean HEPA

Important: This HEPA filter will block most fine dust

particles and allergens. In fact, it blocks 99.97 percent

of particles as small as 0.3 microns, much smaller

than a human hair. Because of this incredible filtering

performance, the HEPA will be blocked with some small

particles that can't be seen. To ensure that the HEPA

is working, please clean after each use as described

below.

1. Open the air outlet bracket. Remove the HEPA.

2. Clean the inlet air HEPA with running water to remove

any residue

3. You can rinse the HEPA under running water at least

once a month or when suction drops

Operating Instruction (cont'd)

User Manual