Owner's manual

2 3
2.1 INSPECTION
The instrument is packed in a corrugated sheet box. As soon
as the unit is received, carefully open the box and inspect it
for any damage that may have occurred during transit. Save
all packing material. If any damage is found, notify the
carriers and our authorised representatives or ourselves
immediately. Also check whether all the specified accessories
are present.
2.2 POWER REQUIREMENTS
The instrument operates over a nominal 115V ±10%, 60Hz or
230V AC ±10% 50Hz AC line. A power cord has been provided
to connect the instrument to proper source.
2.3 SAFETY CONSIDERATIONS
2.3.1 Prior to applying power to the instrument, ensure that earth is
extended to the mains socket.
Intentional interruption of the grounding system, by use of
two-wire plug adapters or two wire extension cords must be
considered an unsafe practice.
2.3.2 Be sure that only correct fuse with proper V & A ratings is
installed for replacement purposes. INCORRECT FUSE
RATING CAN RESULT IN FIRE &/OR SERIOUS DAMAGE
OR HARM TO HUMAN LIFE & PROPERTY.
Section 2
Installation
Level Ranges : 1mV - 10mV p-p,
10mV - 100mV p-p,
100mV - 1V p-p &
1V p-p - 10V p-p.
Sine wave Distortion : <2% upto 100KHz (<1% typical)
<3% above 100KHz.
Squarewave : Time symmetry : ±1.5% (typical <1%)
Rise/Fall Time : <100ns
(into 600 ohms +20pf).
Triangle Linearity : Better than 1%.
Sweep Input : 0 to +10V DC.
Sweep Range : 100:1 approx. (For external input at
SWEEP IN).
Input Impedance : 30K ohms approx.
GENERAL
Power : 115 / 230V AC ±10%,47- 63Hz.
Consumption : 5VA.
Dimensions (mm) : 245 (W) x 76 (H) x 185 (D) mm
(approx.).
9½” x 3” x 7¼”
Weight : 2 Kg. / 4.5 lbs (approx.).
1.4 ACCESSORIES
1. BNC to BNC - 1
2. Operation Manual - 1
3. Power Cord - 1