User Guide

VXi BlueParrott
®
B450-XT User Guide
PAGE 15
ADVANCED FEATURES AND FUNCTIONS (continued)
Transferring Audio
To transfer audio from the headset to the cell phone while on a call, press and hold the Volume Down
button for 1-2 seconds. The audio will transfer to the phone. Repeat to transfer audio back to the headset.
When audio is transferred to the phone, the light on the headset will be off until audio is transferred back
to the headset.
Turning Headset Indicator Lights On/Off
A quick press of the Volume Up and Volume Down buttons together will turn the headset indicator lights
off. Repeat to turn the indicator lights on.
When powering on the headset, the indicator lights will be in the same state as they were when last
powered off.
Reset Headset Paired Devices List
This will reset, or clear the headset’s internal paired devices list. The headset must be on to perform this
function.
1. Power on the headset. It does not matter if it connects to any devices.
2. Hold the headset near your ear and press and hold the Volume Up and the Volume Down buttons
together for approximately 6-10 seconds until two low tones are heard.
3. Power off the headset. The pairing memory is now clear and will need to be paired to any desired
devices before it can be used with them.
Reset Parrott Button Defaults
This will reset or clear the headset’s internal paired devices list and will also restore the Parrott Button’s
factory defaults (voice command and mute). The headset must be on to perform this function.
1. Power on the headset. It does not matter if it connects to any devices.
2. Hold the headset near your ear and press and hold the Parrott Button and the Volume Down buttons
together for approximately 6-10 seconds until you see two quick purple flashes on the MFB.
3. The headset Parrott Button is reset and the pairing memory is now clear. The headset will re-enter
pairing mode. If you are not ready to re-pair to your device, power off the headset.