User's Manual

 Enter your PIN1 code. Clear the incorrect digits by using the right soft key and press
OK for confirmation. e.g. if your PIN1 is1234, please enter:
1 2 3 4
If you enter incorrect numbers for three times in succession, your SIM card will be
locked and your phone will ask you to enter PUK 1 number. If you do not know the PUK 1
code, do not try. Instead, contact your network service provider. See “Safety settings”.
Note: your network service provider sets a standard PIN 1 code (4 to 8 digits) for your
SIM card. You should immediately change this number. See “Safety settings”
2.4.4 Unlocking your phone
To prevent unauthorized use, you can set phone protection. If you have selected this
function, you must draw unlocking pattern each time you turn on your phone, to unlock the
phone and then make or answer calls. You may clear the unlocking pattern (see Safety
settings). In this cause, the unauthorized use of your phone cannot be protected.
If you forget your phone password, you must contact the retailer or local authorized
service center to unlock the phone.
2.4.5 Connecting to the network
 Once your SIM card is unlocked, your phone searches for available network
automatically
(the screen will show the network searching is underway). If your phone has found the
available network, the name of network service provider appears at the center of
screen.
Note: If “only for emergency calls” appears on the screen, it indicates that you are
beyond the network coverage (service area), and that you can still make emergency calls
depending on the signal intensity.
2.4.6 Making a call
When the logo of network service provider appears on the screen, you can make or
answer a call. The bars at the upper left corner of screen indicate the intensity of network
signal.
Conversation quality is significantly affected by obstacles, thus moving within a small
area while making or answering a call can improve the conversation quality.
2.4.7 Making a domestic call
In the Dial screen, enter a number, and press the Dial key to make a call. To change the
number, delete the digits you have entered. During dialing, the animation appears on the
screen. After the call is picked up, the screen will show call status information. If the
connection alert tone has been set, your phone will ring the alert tone (network
dependent).
To end a call, press the Hang Up key.