User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 2.4.7 Making a domestic call
- In the Dial screen, enter a number, and press the Dial key to make a call. To change the number, delete the digits you have entered. During dialing, the animation appears on the screen. After the call is picked up, the screen will show call status inf...
- 2.4.8 Making an international call
- 2.4.9 Making a call from the list
- 2.4.10 Making an emergency call
- 2.4.11 Call menu
- Messaging
- Messaging lets you send text and multimedia messages to any contact that has an SMS device. The multimedia messages include photos, video clips (for iPhone 3GS or other new style phones), contacts information, and voice memos. What’s more, you can sen...
5 SD Card Introduction
Your mobile phone supports SD card to expand the memory. Install the SD card
according to the indication.
As one of storages for your phone, SD card has been set as the default storage at
factory. You can directly use it without making any settings.
Use as flash disk: If “Phone——Data Wire——PC” is well connected, the PC will
prompt “New hardware is found”, and “MT65xx Android Phone requires to be installed” will
appear in the dialog box, see the figure below:
Check the relevant menus in the phone are opened or closed, selecting one by one as
follows:
Main Menu - Settings - Application - Development - USB debugging. Uncheck “USB
debugging”.
After checking and confirmation, reconnect “Phone - Data Wire - PC”, and pull down
notification menu in the standby interface: