GP-FLEX-30 - Product Manual

4
gpelectric.com
GP-FLEX-30
PART
01. Ring Terminal Battery Connector
02. 50’ MC4 Cable with Male and Female MC4 Connectors
03. Tie Wrap
04. #10 x 1” Wood Screws
05. #10 x 1.5” Machine Screws
06. #10 Well Nuts
07. #10 Lock Washers
08. #10 Flat Washers
09. 3/8” Plastic Cable Clamps
10. #8 Screws for Cable Clamps
11. Fuse Holder Inline with 10A Fuse
12. Solar Flex Module
13. GP-PWM-10 Controller
1.4 Parts Checklist
GP-FLEX-30
2
1
6
6
6
6
6
6
6
6
1
1
1
SPECIFICATIONS GP-FLEX-30
Cell type Monocrystalline
Rated power (Pm) 30W
Maximum power voltage (Vmp) 17.8V
Maximum power current (Imp) 1.70A
Open circuit voltage (Voc) 21.2V
Short circuit current (Isc) 1.83A
Voltage coefcient –60.8mV / °C
Power coefcient –0.38% / °C
Current coefcient –2.2mA / °C
Module efciency 19.6%
Maximum system voltage 600VDC
Series fuse rating 10A
Weight 1.1 lb (0.49 kg)
Dimensions
21.1 x 15.25 x 0.1 in / 537 x 388 x 3 mm
Frame type / material Laminated TPT backsheet, includes
aluminum grommets
Max power tolerance +/- 5%
Power Specications calculated
at STC:
• Irradiance: 1000 W/m
2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5
Specications are subject to
change
1.5 Module Specications
01 03
04
09
05
06
07 08
02
12
13
Battery (not included)
30
10 11