TABLE OF CONTENTS Goal Zero products are designed to keep you powered while you’re doing what you love. Whether you’re climbing in the Himalaya, living in your van while you travel the world, or camping in your backyard we will keep you powered. Welcome to the solar life. Getting Started 2 i. Get to Know Your YETI ii. Unpacking Your YETI iii. What it Powers Charging your YETI 4 i. Charging from Solar ii. Charging from the Wall iii. Charging from the Car Using your YETI 6 i. What can I Power? ii.
Get To Know Your Gear INPUT Solar/DC Inputs Anderson Powerpole Display Display Backlight Master Power Button Individual Port Power Button (master power must be on) OUTPUT AC Outlets (pure-sine wave) Three USB Outputs Three DC Outputs Anderson Powerpole Chaining Output Anderson Powerpole chaining port located on the back of YETI.
Charging Your YETI GOAL ZERO YETI 1250 Solar Generator CHARGE ME NOW: Before using or storing, plug your YETI into the wall until it is FRIDGE fully charged. Keep your YETI plugged in when not in use. For more tips and tricks on keeping your battery healthy, see the BATTERY 101 section. LCD Battery Display: The LCD Battery Display indicates the charge level of your YETI. There are 5 segments to the battery, approximating 20% - 40% - 60% - 80% -100% capacity.
Using your YETI What to power from your YETI: USB: Smartphones, MP3 Players, Digital Cameras, E-readers, Tablets, etc. 12V: Goal Zero Lights, 12V appliances, etc. 2. OUTPUT shows the amount of power (watts) your devices are using while plugged into the YETI. 3. Yeti 1250 Warnings: Battery Fail: Replace internal battery AC: Laptops, Cameras, CPAP, Display Monitors, Appliances, Fridges, etc.
Technical Specifications Frequently Asked Questions What type of battery is in my YETI? Charge times Your YETI uses a Group 31, 12V, 100Ah, sealed lead-acid battery (AGM), Wall charger (72W) 18 hrs Car charger (30W) 44 hrs 2x GOAL ZERO Boulder 30 40-80 hrs 3x GOAL ZERO Boulder 30 27-54 hrs 1. AGM batteries should be kept full at all times. GOAL ZERO Nomad 100 24-48 hrs This means you should leave your YETI plugged into a power sources at Cell type AGM Lead Acid 2.
Second, you will need to check the capacity for the individual output ports. For example, the AC port is monitored by an inverter that allows for 1200W of continuous power. This means if your device is a pulling more than 1200W for an extended period of time, the YETI’s inverter will shut off. Finally, once you know your device is compatible, you’ll want to determine how long you’ll be able to power your gear from the YETI. Here’s a quick and dirty lesson in power.
Education BATTERIES 101: GOAL ZERO utilizes the latest and greatest in battery technology to accompany you on all life’s adventures. From the versatile and lightweight Lithuim Ion, to the robust and powerful Lead Acid, we’ve compiled some helpful tips to keep your GOAL ZERO batteries working their best. i. Batteries need exercise – we didn’t invent solar power, we perfected it. Some things to keep in mind when recharging your gear with solar power: i.
Warranty & Contact LIMITED WARRANTY GOAL ZERO LLC warrants to the original consumer purchaser that this GOAL ZERO product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in Paragraph 2, below, subject to the exclusions set forth in Paragraph 5, below. This warranty statement sets forth GOAL ZERO’s total and exclusive warranty obligation.