User manual

8 9
What type of battery is in my YETI?
Your YETI uses a Group 31, 12V, 100Ah, sealed lead-acid battery (AGM),
similar to what is found in your car. Here are some basic facts about AGM
batteries:
1. AGM batteries should be kept full at all times.
This means you should leave your YETI plugged into a power sources at
all times, especially during storage.
2. AGM batteries last longer if you do not drain them completely.
This stems from the “battery memory myth” in old rechargeable batteries.
You can read more about this in the Battery 101 section.
Can I replace the battery in my YETI?
Yes, the battery inside the YETI is extremely easy to replace.
1. Remove the four bolts holding down the top of the YETI.
2. Lift the top of the YETI off and set aside.
3. Remove the metal battery strap by unscrewing the bolt and lifting the
strap off.
4. Remove the two battery terminal bolts.
5. Disconnect the wires on the battery terminals.
6. Lift the old battery out of the body of the YETI
**This battery is HEAVY. Use caution and proper technique when lifting.
7. Insert replacement battery and reassemble in reverse order of steps
above.
How do I know if my YETI is charged?
To check the charge level of your YETI, refer to the LCD Battery Display. When
lit up, you’ll see a battery outline with five segments, indicating the current
charge level. You can turn on the Battery Display by pushing the Master
POWER button. It is OK to use your YETI even when it’s not fully charged.
How do I know if my device will work with the YETI?
First, you’ll need to determine the amount of power your device requires. This
may require some research on your end, a good Google search or examining
the user guide for your device should suffice.
Technical Specifications Frequently Asked Questions
Charge times
Wall charger (72W) 18 hrs
Car charger (30W) 44 hrs
2x GOAL ZERO Boulder 30 40-80 hrs
3x GOAL ZERO Boulder 30 27-54 hrs
GOAL ZERO Nomad 100 24-48 hrs
Battery
Cell type AGM Lead Acid
Pack capacity 1200Wh (12V, 100Ah)
Lifecycles hundreds of cycles
Shelf-life Keep plugged in or charge every
3 months
Fuses 200A (4x 50A fuses in parallel)
Management system MPPT charge controller, low
battery protection
Ports
USB port (output) 5V, up to 2.1A (10W max),
regulated
6mm port (output, 6mm) 12V, up to 6A (72W max)
12V car port (output) 12V, up to 10A (120W max)
12V Power Pole port (output) 12-14V, up to 30A (360W max)
AC inverter (output, pure sine
wave)
110V, 10A (1200W
continuous, 1500W surge max)
charging port (input, 8mm) 16-48V, up to 10A (160W max)
Anderson Power PP45 (input) 16-48V, up to 20A (240W max)
Anderson Power SB175
(chaining)
12V, up to 175A (2100W max)
General
Chainable yes
Weight 103 lbs (46.7 kg)
Dimensions 11 x 16 x 14.5 in (27.9 x 40.6
x 36.8 cm)
Operating usage temp 32-104 F (0-40 C)
Certs CE, FCC, ROHS
Warranty 6 months