Product Brochure

FS20Z-1 Isolated Contact Fixture Module
The Linear FS20Z-1 Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical
box to operate loads or control relay-based devices. The relay can be isolated for dry contact
applications or powered to switch live loads. This device can operate loads of up to 277v.
Possible Applications: Commercial Lighting, In-Ceiling Lighting/fans,
Dry-Contact Relays, Pool Pumps, Water Heaters.
WO15Z-1 Wall Mounted Outlet
The Linear WO15Z-1 Wall Outlet is wired in place of a standard duplex receptacle. This device allows
remote ON/OFF control of loads connected to the bottom outlet (the other outlet remains powered at all
times).
2008 National Electric Code Compliance
The 2008 NEC requires that all new installations of single and multi-family homes install tamper-resistant
outlets. The WO15Z-1 is fully compliant with this code.
PD300Z-2 Plug-in Lamp Module
Z-Wave Plug-in Lamp Module
T
he Linear PD300Z-2 Plug-in Lamp Module is designed to provide Z-Wave control to a connected
dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the
lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off
remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and
one pass-through (powered at all times).
AutoSense
Unique to Linear, the AutoSense feature allows for local lamp activation independent of the Z-Wave
controller status. With AutoSense, one can simply switch the connected lamp’s manual switch off, then
on, and AutoSense will instruct the PD300Z-2 to turn the lamp on.
PS15Z-2 Plug-in Appliance Module
The Linear PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected
load. The PS15Z-2 module is plugged into any standard grounded AC wall outlet, and the appliance or
other device is then plugged into the module. Once connected, the appliance/device can be turned on
or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled,
and one pass-through (powered at all times).
Linear Z-Wave Lighting Products