SDS

3. COMPOSITION AND INFORMATION ON INGREDIENTS
Hazardous components within the
meaning Of EEC directive 67/548 and
corresponding classification
CAS #
Concentration
Hazard
Classifications
EC1272/2008
Hazard
Code
ISOPROPANOL
67-63-0
3.0%
Flam. Liq. 2
Eye Irrit. 2
STOT SE 3
H225
H319
H336
OCTADECYL MERCAPTAN
2885-00-9
1.5%
Skin Corr./Irr. 2
Eye Dam./Irr. 2
STOT SE (Resp.) 3
NON-HAZARDOUS
COMPOSITION
95.5%
NOTE: These EC1272/2008 classifications are for the neat raw materials cited, not for the finished good. Please see Section 2
Hazards Identification for classification on/for the finished good.
4. FIRST AID MEASURES
4.1 Inhalation: If difficulty or discomfort in breathing is experienced, remove to fresh air.
4.2 Ingestion: Contact a physician or obtain medical treatment. Water may be consumed to dilute.
4.3 Skin Contact: Remove any contaminated clothing. Wash contacted skin with water or soap and water
thoroughly.
4.4 Eye Contact: Flush with water for 15 minutes. If irritation persists get medical attention.
5. FIRE FIGHTING MEASURES
5.1 Extinguishing Agents: Foam, CO2, Dry Chemical, Sand or Earth
5.2 Fire-Fighting Equipment: Self-contained breathing apparatus with full face-piece is recommended.
5.3 Advice: Typical fire extinguishing techniques may be used.
5.3 Unusual Fire Hazards: Container may melt and leak in heat of fire.
6. ACCIDENTAL RELEASE MEASURES
6.1 Clean-Up Method: Dike to contain spill. Use clay or other inert material sand or vermiculite to absorb. Rinse area
afterwards with copious amounts of soap and water. Damp mop contacted surfaces for any residue.
7. HANDLING AND STORAGE
7.1 Handling: Avoid contact with eyes. Do not ingest or inhale. Good hygiene practices should be followed when
handling this material. Wash thoroughly after handling.
7.2 Storage: Keep container tightly closed and in a well ventilated area. Keep product from excessive heat.