Installation Guide
Assembly Instructions: 1048-FM (Chatham)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
A
B
C
D
E
F
H
G
J
I
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit
breakerandcompletelyremovetheoldxturefromthe
ceiling, including the old mounting strap.
1. From the parts bag remove the mounting strap
assembly. One end of nipple (F) should be attached to
mounting strap (A) with washer and hex nut (C and D)
in place.
2. Attach mounting strap (A) to the junction box using
mounting screws (B) and a screwdriver. Tighten securely.
CONNECTING THE WIRES
3.Haveanassistantsupportthexture’sweightwhile
completingthewiring.Cutawayexcesswire.Thread
thexture’swiresthroughthenipple.Attachthexture’s
wirestothepowersupplywiresfromthejunctionbox.
Connect black to black (or smooth); white to white
(or ribbed); ground to ground (green or copper). Twist
the ends of the wire pairs together, and then twist on
a wire connector. Make sure all twists are in the same
direction. If there is no ground wire (green or copper)
comingfromthejunctionbox,locategroundscrew(E)
onmountingstrap(A)andwrapthexture’sgroundwire
around the green ground screw (E). Use a screwdriver
to secure ground screw (E) onto the mounting bracket.
Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
4. Raise ceiling pan (H) up to cover mounting strap (A) and secure the ceiling pan
in place by threading decorative nut (G) onto nipple (F).
5. Carefully i
nstalllightbulbs(notprovided)inaccordancewiththexture’s
specications.Donotexceedthemaximumrecommendedwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread