Installation Sheet

Assembly Instructions: 3118-BA2, BA3 (Hines)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completelyremovetheoldxturefromthewall,includingthe
oldmountingstrap.
1.Mountingbracket(B)maybeattachedtobackplate(G).If
so,useascrewdrivertoremovedeconuts(F).Placethedeco
nutsasideforfutureuse.Leavemountingscrews(A)inplace
onmountingbracket(B).Mountingbracket(B)containsseveral
pairs of threaded holes. Find the pair of holes that matches the
spacingoftheholesonyourjunctionboxandonbackplate(G).
Pullthehousewiresthroughthecenterofmountingbracket(B).
Placemountingbracket(B)overthejunctionboxandsecure
mountingbracket(B)tothejunctionboxwithmountingscrews
(D)andascrewdriver.Besurethatthemountingbracketis
level.Tightenthescrewssecurely.
2.Forextrasecurity,useplasticanchors(C)overmounting
screws(C1)tosecuremountingbracket(B)tothewall.
CONNECTING THE WIRES
3.Haveanassistantsupportthexture’sweightwhile
completingthewiring.Refertothewiringdiagramandattach
thexture’swirestothepowersupplywiresfromthejunction
box.ConnectHottoHot,NeutraltoNeutral,andGroundto
Ground.Twisttheendsofthewirepairstogether,andthen
twist on a wire connector. Make sure all twists are in the same
direction.Ifthereisnohousegroundwirecomingfromthe
junctionbox,locategroundscrew(E)onthemountingbracket/
mountingstrapandwrapthexture’sgroundwirearoundthe
groundscrew.Useascrewdrivertotightenthetopofground
screw(E)ontothewiresandintothemountingbracket/
mountingstrap.Tuckthewiresintothejunctionbox.
FINISHING THE INSTALLATION
5.Placethexture’sbackplate(F)overmountingscrews(A)so
thatmountingscrews(A)protrudethroughtheholesinthefront
of backplate (F).
6.Threaddeconuts(F)ontomountingscrews(A).
7.Slideshades(I)oversockets(H)andtwistsocketrings(J)
onto the threads of the sockets to secure in place.
8.Installlightbulbs(notprovided)inaccordancewith
thexture’sspecications.Donotexceedthemaximum
recommendedwattage.
Your installation is now complete. Turn on the power and test
thexture.
For Customer Service, please
contact the place of purchase.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe
down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
J
F
K
G
N
D
C
C1
E
B
A
D
I
G
H