Instructions / Assembly

IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
CONNECTING THE WIRES
4.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(or
ribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.Makesureall
twistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)onmounting
strap(B)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew(E)ontothe
mountingbracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
5.Placebackplate(F)overmountingstrap(B)sothatmountingscrews(D)protrudethroughtheholesinbackplate(F).Securethe
backplatetothemountingstrapwithdecorativenuts(H).Twistuntilthebackplateofthextureissnugagainstthewall.
6. Installalightbulb(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended
wattage.
7.Loosenthumbscrew(I).Tilttheglassshade(M)anddecorativecap(K)slightly,andglassshade(M)anddecorativecap(K)
overthelamp.Straightendecorativecap(K)andlid(J)ontopofglassshade(M)checkingthateverythingislevelandsecurethe
assemblybytighteningthumbscrew(I).
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
For Customer Service, please
contact the place of purchase.
AssemblyInstructions:3218-1W & 3219-1W (Dixon)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Shutoffthepoweratthecircuitbreakerandcompletely
removetheoldxturefromthewall,includingtheoldmountingstrap.
1.Mountingstrap(B)containsseveralpairsofthreadedholesandtwoofmountingscrews(D).Youmayneedtotightenhexnuts(C)
thatholdthescrewsinplace.
2.Placemountingstrap(B)uptoyourjunctionbox.Placebackplate(F)overthemountingstrapliningupmountingscrews(D)withthe
holesinbackplate(F).Thiswillallowyoutoensurethatyouarehangingthexturestraight.
3.Pullthehousewiresthroughthecenterofmountingstrap(B).Securemountingstrap(B)tothejunctionboxwithmountingscrews
(A)andascrewdriver.Tightenthescrewssecurely.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
FE
A
H
B
D
C
J
L
K
I
M
G