Manual
1. Attach the nial (N) to Threaded rod (L) and sl
ide through
Bottom Cap (K)
2. Place the Glass Shade (M) ush with the Back pl
ate (J) just
under the "L" shaped lip.
3. Slide Bottom cap assembly (K+L+N) into hole at t
he bottom
of Glass shade (M), with the threaded rod going thr
ough the
hole in bottom of xture back plate and tighten with Hex nut (O).
*If the glass does not sit ush with the wall remove the glass,
gently press the lip up bit to increase glass tension and
reinstall the glass.
4. Install the light bulb in accordance with the xture's
specications.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
Fig. 1
7203 RBZ
O
N
H
M
J
K
L
7203 PartsInstallation-20101005m
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Multi-Family 7203
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts
are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Mounting strap w/
ground
screw
1ea 3/4” x 4”
Junction box screws
2ea #8-32N*18mm
Threaded rod
2ea 3/8”*H45mm
Deco nut (round nut)
1ea 3/8”*H9mm
Mounting strap w/
ground
screw
1ea 3/4” x 4”
Mounting strap w/
ground
screw
1ea 3/4” x 4”
Spring washer
1ea 15*H3mm
Bottom cap
1ea 38*H28mm
Finial
1ea 13*H9
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Read and review installation instruction sheet
before assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.