Installation Guide

ManualsBrandsGolden Lighting ManualsPendant LightingGolden Lighting Single Light Mini Pendant from the Echelon Collection

Canopy 1ea Hex nut 1ea Wire connectors 2ea

Mounting

bracket

1ea Nipple 1ea Socket rings

1ea

Chain 1ft Mounting screws 2ea

Canopy Loop

and Canopy

loop collar

1ea

Chain

connector

2ea

12" Rod

3ea

Crystal draping

A1 x 3pcs

Crystal draping

A2 x 3pcs

Crystal drops

B2 x 3pcs

Crystal drops

C1 x 1pcs

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are

missing or damaged, please note on this sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

to be filled out by retailer

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Echelon 8981-M1L BRI / GRM

Read and review installation instruction sheet, but do

not install before assembling the fixture.

FIXTURE ASSEMBLY INSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: THE SHADE ASSEMBLY CAN BE DAMAGED BY

ROUGH HANDLING. USE CARE WHEN ASSEMBLING.

1. By measuring determine correct number of rods and

chain needed for proper hanging height. There are two

optional 12" rods included.

2.To shorten the fixture trim the wires to the desired length

plus at least 8~10 inches. You must use at least one Rod.

3. To lengthen the fixture add additional rods

(ROD-8981 CH) or additional chain (CHAIN-8981),

available separately.

Fig 1

Crystal drops are not included in

parts bag. They are already

installed on the fixture.

8981-M1L BRI / GRM

These two Rods may

be removed

additional Rods and/or

Chain may be added.

Summary of content (5 pages)

PAGE 1
PARTS & ASSEMBLY SHEET Fixture Name: Echelon 8981-M1L BRI / GRM This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________Co.
PAGE 2
PARTS & ASSEMBLY SHEET Fixture Name: 4. Pull the fixture’s wire through the Rods. Echelon 8981-M1L BRI / GRM Fig 2 5. Thread Rod (F) into Frame at (H) until tight. expanded view of assembly 6. Thread Rod (D) into Rod (F) until tight. repeat for any C E F A10 additional rods. 7. Feed the fixture wires through the Top loop (A) and pull A12 A9 G the wires until taut. 8. Thread Top loop (A) into Rod (C) until tight. 9. By measuring determine correct number of links needed for proper hanging height.
PAGE 3
INSTALLATION INSTRUCTIONS Fixture Name: Echelon 8981-3P, 5, 9, M1L BRI / GRM For Chandelier Light Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE (Fig.1) Fig. 1 1. Carefully remove the new fixture from the carton and the yellow bag that holds all parts. Check that all parts are included as shown in the illustration and parts list. 2. Shut off the power at the circuit breaker and remove old fixture from ceiling, including the old mounting strap. 3.
PAGE 4
PAGE 5