SDS

SAFETY
DATA
SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
Paint Clean Up Wipes- 2062
Revision Date: 30-Mar-2015
Document No.: 130529-5 Page 2 of 4
Release Date: 1/10/2014
Note to Physician: Treat symptomatically.
SECTION 5 – FIRE FIGHTING MEASURES
Extinguishing Media
Suitable: Carbon dioxide or water spray. Fight larger fires with water spray or alcohol resistant foam.
Unsuitable: None known.
Specific Hazards Arising from Chemical
None
Protective Equipment and Precautions for Firefighters
Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA).
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures
Personal Precautions: Use personal protective equipment as recommended in section 8. Isolate the hazard area and
deny entry to unnecessary and unprotected personnel.
Environmental Precautions: See Section 12 for ecological information.
Methods and Material for Containment and Cleaning Up
Pick up large pieces, and then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use
appropriate Personal Protective Equipment (PPE). Scoop up material and place in a disposal container.
SECTION 7 – HANDLING AND STORAGE
Precautions for Safe Handling
Handling: Avoid contact with skin and eyes. Avoid breathing vapor or mist. Do not swallow. Handle and open container
with care. When using do not eat, drink or smoke.
General Hygiene Advice: Launder contaminated clothing before use. Wash hands before eating, drinking, or smoking.
Conditions for Safe Storage, Including any Incompatibilities
Storage Conditions: Store in a dry area. Keep in well-ventilated area. Store at temperature below 40ºC, not under
direct sunlight. Keep out of the reach of children. Keep container tightly closed.
Incompatible Materials: None known.
SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
No data available.
Exposure Guidelines:
No data available.
Appropriate Engineering Controls
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure
limits.
Individual Protection Measures
Respiratory Protection: Not required under normal use conditions. In case of inadequate ventilation wear respiratory
protection.
Skin and Body Protection: Not required under normal use conditions.
Eye/Face Protection: Not required under normal use conditions.
General Work/Hygienic Practices: Do not eat, smoke or drink where material is handled, processed or stored. Wash
hands carefully before eating or smoking. Handle in accordance with good industrial hygiene and safety practices.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES