User manual

18
During the switch-off delay, set on the
 motionsensor,thelampisdimmedto
minimum intensity, but never switches off,
 evenwhensufcientambientlight.
Fig. 19: Function 5.2-3
 Ifnomovementisdetected,thelamp
automatically switches off according the
set switch-off delay on the motion detector.
Fig. 20: Function 5.2-4
6 Mounting
Risk of falling / Material damage
• Place and use tools safely.
• Pay attention to current-carrying or other
lines,lyingbehindplasteranddonotdamagethem!
• The surface must be stable.
Delivered installation material is only suitable for concrete and stone ceilings.
For mounting on other surfaces, other dowels must be used.
6.1 Recessed mounting
1
Fi g . 21: Recessed mounting
 1 plastic,glassorwoodpanel
1. Drill the mounting hole with a Ø17 mm drill.
2. Mount the light sensor as illustrated.