Instruction Manual
Table Of Contents
4
INSTRUCTIONS FOR USE
Connect the small plug from the included AC power cord to the AC IN Jack on the rear of the
product.
Plug the AC power cord to a standard AC wall outlet having 100-240V, 50/60Hz.
For USB Charger, insert the USB cable (not included) into one of the USB ports of the unit and the
other end of the USB cable to your phone or other USB rechargeable product for recharging.
For Wireless Charger, place your Qi integrated mobile phone on the wireless charging area for
recharging.
Note: Ensure your device is compatible. When the phone is not placed on the wireless charging area
correctly, your phone may not charge properly. Wireless charging may not work properly if you have
a thick case on your phone. If needed, remove it before placing your phone on the wireless charger.
When the phone or rechargeable product is fully recharged, remove it from the product.
Care and maintenance
Read the following recommendations before using the device.
Do not expose the device to liquid, moisture or humidity. This may affect product’s internal circuit.
Do not use abrasive cleaning solvents to clean the device.
Do not expose the device to extremely high or low temperature as it may cause to distort certain
plastic parts.
Do not dispose of the device to fire.
Do not expose the device to contact with sharp objects as this will cause scratches and damage.
Do not let the device fell down the floor. The internal circuit might get damaged.
Do not attempt to disassemble the device as it may cause damage.
Product Specifications:
Input: AC 100-240V 50/60Hz 0.7A
4 USB Charger Output: DC 5V 4.1A Max. (total)
Wireless Charger Output: DC 5V 1A Max.
Dimensions: 9-1/16”L x 3-9/16”W x 2-1/4”H
Weight: 8.9 oz
Holds devices up to 0.5” thick
TROUBLESHOOTING
Problem
Solution
The unit does not charge device once connected.
Please ensure if USB Charging Cable is
well-connected