Technical Information

ManualsBrandsGoodman ManualsAir Conditioning4 Ton 15 SEER Air Conditioner Split System - Upflow/Downflow

MBVC Blowers

• Refer to Service Manual RS6200006 for installation, operation, and troubleshooting information.

• All safety information must be followed as provided in the Service Manual.

• Refer to the appropriate Parts Catalog for part number information.

• Models listed on page 2.

RT6223003r1

January 2011

TECHNICAL MANUTECHNICAL MANU

TECHNICAL MANU

ALAL

This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman

does not assume any responsibility for property damage or personal injury due to improper

service procedures or services performed by an unqualified person.

Summary of content (8 pages)

PAGE 1
TECHNICAL MANU AL MANUAL MBVC Blowers • Refer to Service Manual RS6200006 for installation, operation, and troubleshooting information. • All safety information must be followed as provided in the Service Manual. • Refer to the appropriate Parts Catalog for part number information. • Models listed on page 2. This manual is to be used by qualified, professionally trained HVAC technicians only.
PAGE 2
PRODUCT IDENTIFICATION The model number is used for positive identification of component parts used in manufacturing. Please use this number when requesting service or parts information.
PAGE 3
PRODUCT DESIGN GENERAL INFORMATION The MBVC Blower Cabinets are used in combination with a cased evaporator coil for a two-piece blower and coil combination. This combination of blower and coil functions as the indoor part of a split air-conditioning system, and may be matched with a remote condensing or heat pump unit and allows for a variety of mix-matching possibilities. The blower cabinet can also function as an electric furnace when used with an electric heater.
PAGE 4
MBVC BLOWER SPECIFICATIONS D 3 1/4 5 C1/8 (3) KNOCKOUTS 1.125 1.375 1.750 .875 KNOCKOUT (2 PLACES) H 5 6 1/2 W MBVC1200/1600/2000 Dimensions, inches (mm) Physical Information 1 4 MODEL Blower Wheel (D x W) Blower Motor (HP) MCA1 MOP1 W H D Shipping Weight lbs.(kg) MBVC1200 10X8 1/2 4.3 15 17½ (445) 26 (660) 21 (533) 72 (32.6) MBVC1600 10X8 3/4 6.3 15 21 (533) 30 (762) 21 (533) 82 (37.2) MBVC2000 11X10 3/4 5.8 15 24½ (622) 30 (762) 21 (533) 94 (42.
PAGE 5
MBVC BLOWER SPECIFICATIONS BLOWER OPENING DIMENSIONS (TOP VIEW) 10-7/8” 11” 10-1/4” 13-1/4” 11-5/16” 11-5/16” 20-1/16” 16-1/2” 23-1/2” SMALL LARGE MEDIUM MBVC1200/1600/2000 HKR HEATER DATA HEATER KIT BLOWER NO HEAT KIT HKR-03* HKR05-(C)* HKR-06* HKR-08(C)* 1200AA-1** X X X X X 1600AA-1** X X X X X 2000AA-1** X X X X X MBVC ^ = Circuit 1: Single Phase for Air Handler Motor Circuit 2: 3-Phase for HKR3 Heater Kits * = Revision level that my or may not be designated C = Cir
PAGE 6
BLOWER PERFORMANCE DATA SWITCH 9 SWITCH 10 SWITCH 11 800 800 ON ON ON ON ON OFF 800 ON OFF ON OFF HTR kW MBVC1200* MBVC1600* MBVC2000* 3 5 600 600 800 800 6 635 800 8 740 1000 1000 ON OFF 10 1000 1000 1200 OFF ON ON 15 1400 1500 1500 20 NR NR 2000 OFF OFF ON OFF OFF ON 21 NR NR NR ON^ ON^ ON^ ^ Factory setting MODEL MBVC1200 MBVC1600 MBVC2000 COOL SELECTION SWITCHES ADJUST SELECTION SWITCHES LOW STAGE COOL HIGH STAGE COOL 400 540 600 800 1 OF
PAGE 7
WIRING DIAGRAMS THERMOSTATS HIGH VOLTAGE! DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
PAGE 8
WIRING DIAGRAMS HIGH VOLTAGE! DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.