Datasheet

3-349-888-03

2/7.16

GMC-I Messtechnik GmbH

LABKON P Series

Laboratory Power Supplies

Mechanical Design

Dimensions

Weight 5.5 kg

Standard Equipment

1 Benchtop device

1 Protective rubber housing

1 Mains power cable (earthing contact)

1 Safety instructions

1 CD-ROM with operating instructions in German and English

View

Rear panel with protective rubber housing

Connection

Input voltage LABKON P500:

100 V ... 240 V AC, 47 ... 63 Hz,

max. 750 VA

LABKON P800:

180 V ... 265 V AC, 47 ... 63 Hz,

max. 1050 VA

• Power: 500 W or 800 W, respectively

• Voltage up to 120 V, current up to 22.5 A

• Modes: CV and CC, automatic switching

• Voltage and current continuously adjustable

from 0 up to nominal output

• Several parameter groups (instrument settings) can be saved

and retrieved.

• Floating output / no grounding

• High efficiency

• Safe DC isolation

•Output ON/OFF

• Supports SCPI commands

• Manually programmable via keyboard and rotary encoder

• Multifunctional LCD display

• Protective circuits, e. g. overvoltage protection

• Sense functionality

• Benchtop unit, can be installed into 19“ rack

• Rugged, compact and easy to handle

• RS232 interface, optionally available with GPIB (IEEE-488) and USB

• Calibration (adjustment) function

PAGE 1
LABKON P Series Laboratory Power Supplies • • • • • • • • • • • • • • • • • • 3-349-888-03 2/7.16 Power: 500 W or 800 W, respectively Voltage up to 120 V, current up to 22.5 A Modes: CV and CC, automatic switching Voltage and current continuously adjustable from 0 up to nominal output Several parameter groups (instrument settings) can be saved and retrieved.
PAGE 2
LABKON P Series Laboratory Power Supplies Technical Characteristics LABKON P500 35 V / 14.5 A LABKON P500 80 V / 6.5 A Output Ratings Voltage 0 ... 35 V 0 ... 80 V Current 0 ... 14.5 A 0 ... 6.5 A Ripple and Noise (20 Hz to 20 MHz) Voltage (rms) < 5 m Vrms < 8 m Vrms Voltage (peak-to-peak) < 10 mVp-p < 14 mVp-p Current < 8 mArms < 6 mArms Common Mode Current < 1.5 mArms < 1.