Datasheet

ManualsBrandsGOSSEN METRAWATT ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) 0 - 60 Vdc 0 - 40

3-349-437-03

14/4.18

GMC-I Messtechnik GmbH

SYSKONP500, P800, P1500, P3000 and P4500

Computer Controlled Laboratory Power Supply

SYSKON P3000 / P4500

SYSKON P500 / P800 / P1500

Description

Series SYSKON (SYSTEM KONSTANTERs) are manual and remote

controllable DC power supplies for laboratory and system use.

Owing to the highest quality in switching controller technology,

the devices are compact and lightweight despite their high output

power.

Active power factor control assures nearly sinusoidal mains input

current.

The floating output features “safety separation” from the mains

input as well as from the computer interfaces, and is classified as

a safety extra-low voltage circuit (SELV) in accordance with VDE /

IEC. Wide ranging nominal output power values are available from

output voltage and output current.

The power output is voltage and current controlled with limiting to

maximum withdrawable power.

Transition to the control modes is automatic in accordance with

the selected setpoints and load circumstances.

The control loops are designed for short response times.

An automatically activated, dynamic sink (can be disabled)

provides for quick discharging of the output capacitors.

Numerous protective functions and monitoring devices allow for

ideal adaptation to actual conditions of use.

Features

The devices are generally equipped with a control panel and

display, as well as an analog interface.

One USB port and one RS 232 interface are provided as standard

equipment for integration into computer controlled systems. The

drivers for the USB port are provided as accessories on the

included CD ROM.

An optional IEEE 488 interface can be additionally installed, or ret-

rofitted as an option, to connect and control programmable

devices and to provide a standard interface for external communi-

cation with the device.

Manual adjustment of voltage and current is accomplished by

means of two rotary encoders with selectable resolution, or with

the numeric keypad. Numerous additional functions can be

accessed via keys.

Two digital LED displays (5 digit each) read out measured values

and settings. LEDs indicate the current operating mode, selected

display parameters and the status of device and interface func-

tions.

The analog interface makes it possible to adjust output voltage

and current with the help of external control voltages. Monitor

outputs read out an analog image of the voltage and current

output quantities for further processing or additional displays.

These control inputs and monitor outputs can also be used to

couple several devices for master-slave operation with parallel or

series connection.

Two floating trigger inputs are available for controlling certain

device functions. For example, they can be used to switch the

output on and off, or to control sequences.

Furthermore, three signal outputs are included at the analog inter-

face, two of which are floating. These can be activated depending

upon various functions, and can thus be used to control external

devices or sequences.

• Series SYSKON P500/P800/P1500: 500/800/1500 W output power

SYSKON P3000/P4500 series: 3000 W/4500 W output power

• Measuring functions for voltage, current and power

with threshold memory (min & max values)

• Minimal residual ripple and short response times

• USB, RS232C Interface (standard)

IEEE488 Interface (plug-in module option)

• Integrated sequence function (arbitrary function) for the generation

of voltage and current profiles with programmable sequence chain

• Storage of 15 device configurations (setup memory)

• Storage of 1700 sequence parameters

• Output can be switched on and off

• Operating functions can be protected

• Master-slave operation is possible

• Overvoltage, overcurrent and excessive temperature protection

• Compact design, lightweight and minimal power

loss thanks to switching controller technology

• PC Software for remote control

Summary of content (12 pages)

PAGE 1
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply 3-349-437-03 14/4.
PAGE 2
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Applications Range Konstanters are suitable for use wherever electronic modules with controlled direct voltage or controlled current need to be supplied with electrical power, especially in the fields of R&D, testing, production, test systems and training. Due to their characteristic U-I-P curve, the devices have a broad range of operation, making it possible to cover a large range of applications with a single device.
PAGE 3
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Auto-Sensing The device can be switched to sensing mode operation (remote sensing) in order to compensate for voltage drop at the output leads. Sensing lead terminals are available to this end at the analog interface. If the (–) negative sensing terminal is connected to the negative load point, the device is automatically switched to sensing mode operation. Maximum compensatable voltage drop is 1 V per output lead.
PAGE 4
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply General Data Output Operating Ranges, Characteristic U-I-P Curve SYSKON P500 Output Operating Ranges, Characteristic U-I-P Curve SYSKON P3000 Output Operating Ranges, Characteristic U-I-P Curve SYSKON P800 Output Operating Ranges, Characteristic U-I-P Curve SYSKON P4500 Output Operating Ranges, Characteristic U-I-P Curve SYSKON P1500 Output Regulator type Operating modes Output isolation Allowable potential, output–g
PAGE 5
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Analog Interface Functions – Auto-sensing mode – 2 programmable trigger inputs – 3 programmable signal outputs – Voltage control input (0 ... 5 V) – Current control input (0 ... 5 V) – Voltage monitor output (0 ... 10 V) – Current monitor output (0 ...
PAGE 6
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Dimensional Drawing SYSKON P500 / P800 / P1500 482.6 465 76.2 447 40 14 88 501 Installation position for optional interface IEEE-488 (material No.
PAGE 7
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Dimensional Drawing SYSKON P3000 / P4500 482.6 465 101.6 447 40 14 177 501 Installation position for optional interface IEEE-488 (material No.
PAGE 8
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Electrical Data SYSKON P500 / P800 / P1500 Article Number Type Nominal Output Data K346A SYSKON P500-060-030 Voltage setting range 0 ... 60 V Current setting range 0 ... 30 A Power max. 500 W Output Characteristics (ppm and percentage values make reference to the respective setting or measured value) Setting resolution Voltage 1 mV Current 1 mA Setting accuracy (at 23 5 °C) Auto-sensing mode Voltage 0.
PAGE 9
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Article Number Type General Power supply with 230 V~ nominal line voltage Power consumption K346A SYSKON P500-060-030 Line voltage 230 V~ + 10 / – 15 %, At nominal load, 100% 47 … 63 Hz At no load 700 VA; 650 W 96 VA; 37 W Power supply with 115 V~ nominal line voltage Line voltage 115 V~ + 10 / – 15 %, Power consumption At nominal load, 50% 47 … 63 Hz At no load 800 VA; 750 W 55 VA; 36 W Max.
PAGE 10
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Electrical Data SYSKON P3000 / P4500 Article Number Type Nominal Output Data K363A SYSKON P3000-060-120 Voltage setting range 0 ... 60 V Current setting range 0 ... 120 A Power max. 3000 W Output Characteristics (ppm and percentage values make reference to the respective setting or measured value) Setting resolution Voltage 1 mV Current 2 mA Setting accuracy (at 23 5 °C) Auto-sensing mode Voltage 0.
PAGE 11
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Article Number Type General Power supply with 230 V~ nominal line voltage Power consumption K363A SYSKON P3000-060-120 Line voltage 3x230/400 V~ + 10 / – 15 % At nominal load, 100% 47 … 63 Hz At no load 3810 VA; 3710 W 100 VA; 45 W Power supply with 115 V~ nominal line voltage Line voltage 3x115/200 V~ + 10 / – 15 % Power consumption At nominal load, 50% 47 … 63 Hz At no load 2215 VA; 2180 W 73 VA; 48 W Max.
PAGE 12
SYSKONP500, P800, P1500, P3000 and P4500 Computer Controlled Laboratory Power Supply Scope of delivery Manufacturer’s Guarantee • • The SYSKON Konstanter is guaranteed for a period of 2 years after shipment. The manufacturer’s guarantee covers materials and workmanship. Damages resulting from use for any other than the intended purpose, as well as any and all consequential damages, are excluded. Calibration is guaranteed for a period of 12 months.