User Manual

GMC-I Messtechnik GmbH 11
4.3 Device Settings
SETUP
For the purpose of initial start-up, we recommend
setting the following basic parameters in the order
shown at the right:
Setup 2/3 > Culture > Language (for user int
erface)
Setup 2/3 > Culture > Ke
yboard Layout (for alphanumeric entries)
Setup 1/3 > System > Date / Time (for r
eports generating)
Setup 1/3 > System > Brightness (display brightness as
%)
Setup 1/3 > Auto. Measurements 
> 2/2 > Initial Window Style: T
ree or Detail View
Display additional menu pages
Menu selection for operating parameters, page 1 of 3
Set test sequence parameters
Clear database or display statistics,
Set date/time, volume, and brightness
Display additional menu pages
Menu selection for operating parameters, page 2 of 3
Enter a new, select, delete inspector, protect by
Select language for user interface and keyboard
For example, select and configure barcode
Display additional menu pages
Menu selection for operating parameters, page 3 of 3
(see submenu on following page)
Keys with fixed functions
Softkeys = keys with functions that vary
depending on the operating level
Setup 1/3
Setup 2/3
Setup 3/3
(see following page).
save only appears if a USB drive is plugged in
scanner by scanning the displayed barcode
Query software/hardware version, serial
number, calibration data and memory occupancy
Enable functions, display extras
Only with database extension Z853R or feature KB01:
Manage and import own sequences
password; see notes below
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
Parameters for single measurements and test
sequences (see section 4.1.1 and section 6.2)
Set test sequence parameters,
measuring sequences (standard), inter alia, see
section 10.1
Menus for operating the Bluetooth interface
(see section 14.4 ) (only with feature M01)
To submenu for selecting and setting up a printer
see page 14
Figure 2 Device Settings, Main Menu Level – SETUP Switch Setting
The following parameters are advisable for maintenance purposes:
SETUP 3/3 > Test > Display / Buz
zer (for checking info and warning
displays/signals)
SETUP 3/3 > System info > Soft
ware version for updates (see sec-
tion 13.3) and Ca
libration data for adjustment, last and next calibra-
tion (notes see bottom of page 12).
Notes on Parameter Inspector
– The inspector that has just been “selected” is included in the
tests performed as „Inspector“. None of the SECUTEST set-
tings are stored specifically for the inspector – all settings in
the SECUTEST are stored for the respective device and are
available to all inspectors alike.
– I
f an inspector is protected by password, it only prevents those
users who do not know the password from “selecting” this
inspector. When the test instrument is booted up, the pass-
word is not
requested. The inspector remains selected even in
the event of a power failure – a (password-protected) inspec-
tor can only be rejected by selecting another inspector.
As of firmware 1.6.0: In or
der to delete an inspector whose
password you do not know, it is sufficient to enter an incorrect
password five times and to confirm the entry each time. Sub-
sequently a query is issued as to whether the inspector is to
be
deleted. The inspector to be deleted may not be identical
with the currently selected inspector.