User Manual

Manual selection for language and keyboard layout
Country-specific keyboard layout
Jump back to next higher menu level
To parameter for default values
Menu selection for date, volume and brightness
Date and time setting menu
Volume setting menu
Brightness setting menu for LCD
To parameters
Default Settings
Self-test for display and buzzer
Move cursor left
Set Time and Date Menu
Move cursor right
Increase number
Decrease number
Accept changes and jump back
(see settings menu below)
Setup 2/3 > Culture
Setup 1/3 > System 1/2
Setup 1/3 > System 2/2 > Default Settings
Setup 1/3 > System 1/2 > Date / Time
Page 2/2: Info on date format, decimal separator
messages, user interface, measurements
for USB or touch-screen keyboard
With SECUTEST PRO only (feature E01):
calibrate touch-screen keyboard
Select language for user interface
Select language for user interface
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
Info: date format, decimal separator *
Reset to default values 
CAUTION ! The setup configurations are deleted!
(also deletes the list of inspectors, the con-
tents of the database as well as the com-
pany logo
)
12 GMC-I Messtechnik GmbH
Figure 3 Device Settings, Submenu Level – SETUP Switch Setting
Notes on Calibration Data (Adjustment, Calibration)
SETUP 3/4 > System info 2/6 > Calibration data:
While the data of the last adjustmen
t and calibration were set by
the calibration center, the date and time of the next calibration
(date of recalibration) can be modified by the user, if necessary,
by selecting the EDIT button, as shown in the example above for
setting the system time.
* firmware version 1.7.0 and higher contains the parameter „Measuring
Sequences“ for the selection of country-specific standards (VDE, OVE
and NEN) in SETUP 1/3 under menu item „Auto measurements 2/2“.