User Manual

14 GMC-I Messtechnik GmbH
Printer Functions – Selection and Settings for Thermal Printer as an Example
Selection of connected printer
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
Retrieval of information or settings
Setting parameters
PRINT
ESC
HELP
MEM
Setup 2/3 > Printer
Setup 2/3 > Printer > Z721S
Thermal Printer > Settings 1/2
Thermal Printer > Settings 2/2
Printer Z721E*: Barcode label printer 
Printer info/printer settings
* for test instrument firmware as from 1.8.3
Printer Z721D*: Printer info/printer settings
* Phase-out model
Printer Z721S: Printer info/printer settings
Printer settings: 
Parameters depend on printer type
Printer info: name, status, type
Change to page 2/2
Visual inspection details: display/hide
Signature field: display/hide
Location info: display/hide
Delete a (company) logo imported into the test 
instrument from a USB flashdrive (see settings 2/2).
Load and display a logo from a USB flashdrive
Change to page 1/2
Load a (company) logo from an inserted USB 
flashdrive: Selection list is displayed
Display currently loaded logo
Prerequisites for loading a logo:
Format: bitmap (file ending .bmp) (black/white)
Windows, depth: 1 bit
Note
The PC program Report Designer is no longer supported
as from firmware version 2.1.0. Adjustments of the test
report and import of a company logo (only applicable for
thermal printer Z721S) can now be directly performed in
the SETUP of the test instrument, see above,