User Manual

GMC-I Messtechnik GmbH 17
Test Structure Customer View – Hierarchy of Object Levels in the SECUTEST PRO and SECULIFE ST BASE(25) 
or in Devices with Database Extension
Z853R or Feature KB01
Customer
Id
Designation
Street
Device
Zip code
City
Database
Manual
Id
Designation
Measurement 1
Measurement 2
Measurement 3
Sequence
* Test interval: additionally available for test instruments with database extension SECUTEST DB+ (Z853R) and/or feature KB01or SECUTEST DB comfort
(Z853S) and/or feature KD01
** only with SECUTEST PRO BT comfort or with database extension SECUTEST DB comfort (Z853S) and/or feature KD01: 
additional entry option of Medical Electric Device (ME Device) as well as further parameters such as UDI and application parts
ME Device**
UDI = Unique Device Identification)
1/6 2/6 3/6 4/6 5/6 6/6
Id Test interval* Comment No. appl. part 
type B**
Cost center
Mains connection **
Designation Type Serial No. No. appl. part 
type BF**
Cepartment
Location Manufacturer Safety classs No. appl. part 
type CF**
UDI**
Customer 
Customer 
MEM Customer
Figure 6 Database Structure as Customer View in Test Instruments with feature KB01
Note
Database elements shown with grey color shading
On devices which are not enabled for function „Extended
database
structure“ Z835R or feature KB01 (= property,
building, level, room) or SECUTEST DB comfort Z853S or
feature KD01 (medical electric devices), the correspond-
ing elements are displayed in grey.
Note
Mandatory Fields
Mandatory fields are marked in red in the entry fields of
the test instrument as well as in Figure 5 and Figure 6.
Note
Hierarchies
It is imperative that the following hierarchies be adhered
to
:
Room or Level m
ust be subordinated to a Building without
fail.
Devices or ME Devices must be subordinated to a Customer
without fail.
Hierarchies and Data Migration
Database objects „Device“ or „ME Device“ must be subordinated
to a Customer without fail. If so-called „legacy data“ have been
imported into the test instrument which do not comply with this
rule (e. g. as a result of a firmware update or via function „Restore
database“), C
ustomer objects are generated automatically. The
same applies to database objects „Room“ or „Level“ which must
be subordinated to a Building without fail. In this case, Building
objects are generated automatically.
5.2.4 Switching between 2 Tree Structure Presentations 
(for SECUTEST PRO and SECULIFE ST BASE(25) or for Devices
with Database Extension Z853R or Feature KB01)
➭ Repeatedly pressing the MEM key switches between the loca-
tion and customer view.
➭ Qui
t the database view by pressing the ESC key.