User Manual
GMC-I Messtechnik GmbH 21
5.4.2 Searching for Structure Elements
➭ Scroll to the first menu page (MEM 1/3) with the help of the
key.
➭ Scroll to the third menu page (MEM 3/3) with the help of the
key.
➭ P
ress the text symbol in order to search for text.
➭ Press the ID symbol in order to search for an ID number.
There are three ways to enter search terms:
– Via the softkeys
– Via a connected USB keyboard
– Via barcode or RFID scanner
Note
As from firmware version 2.1.0 a distinction is made
between upper and lower case.
The keyboard entry function is opened automatically in any case.
➭ The se
arch is started after the entered search term has been
acknowledged.
Note
Only exact matches are displayed: no wildcards, case
sensitive.
The found object is displayed inversely.
➭ If
several objects are found which match the search string,
you can toggle with the scroll keys between the different
search results.
➭ The de
signation and ID number can be shown or hidden by
pressing the magnifying glass symbol.
5.4.3 Displaying Measured Values from Saved Tests
➭ Switch to the database view by pressing the MEM key.
➭
Scroll to the first menu page (
Navigation)
(MEM 1/3)
with the help of
the
key.
➭ Either select the desired object (ID number) with the scroll
keys or search for it as described in Section 5.4.2.
➭ Th
en mark the desired test with the cursor, depending on
whether single measurements or test sequences are involved:
Single meas.: date / measuring function
(7/17/14 / RISO)
Test sequence: date / test standar
d (7/17/14 / VDE...)
➭
In order to view the single measurements of a test se-
quence after testing, press the
symbol for executed
measurements. The measurements appear in a list.
➭
Select the desired measurement with the scroll keys.
➭
The associated measuring parameters can be shown or
hidden using the keys shown at the right.
➭ The measured value view is exited by pressing the
green checkmark.
5.4.4 Deleting the Database
The database in the test instrument can be deleted in two differ-
ent ways:
• SETUP
switch setting, page 1/3 > Database > Delete
• Press the MEM key > scroll up wi
th the scroll key until the
database is selected > press the DEL softkey.