User Manual

24 GMC-I Messtechnik GmbH
7 Notes on Saving Single Measurements and Test
Sequences
At the end of each test, test results can be saved under an ID
number which is unequivocally assigned to the respective test
object (= device or ME device).
Depending on the initial situation, i.e. whether or not a test struc-
ture or database is already available or an ID has already been
ent
ered, the following different procedures are used for saving:
Variant 1 – pre-selection of an existing ID
You’ve already set up a
test structure in the test instrument or
uploaded one with the help of report generating software.
Open the database view before starting the measurement by
pr
essing the MEM key. Then select the test object or its ID within
the test structure by pressing the respective scroll key. Exit the
database view (MEM navigation) by pressing MEM and start the
measurement. Press the “Save as” key
at the end of the mea-
surement. The display is switched to the SA
VE view. The ID
appears with a green or orange background. Press the save
key once again in order to complete the procedure.
Variant 2 – entry of an existing ID at the end of the test
You’ve already set up a
test structure in the test instrument or
uploaded one with the help of report generating software.
You perform the measurement without first opening the database.
No t
est object was previously selected in the database. Press the
“Save as” key
at the end of the measurement. The following
message appears: “No test object select
ed!” Press the ID key.
The softkey keyboard appears.
If you enter an ID here which is already in the database, the data-
base view appears (MEM
navigation) automatically, and the test
object‘s ID is displayed inversely. Acknowledge the entry by
pressing the key. The display is switched to the SAVE view. The
ID appears with a green or orange backgr
ound. Press the Save
key once again in order to complete the procedure.
Variant 3 – entry of a new ID at the end of the test
You haven’t yet set up a test structure in the test instrument, or
the ID is not included in the existing structure.
Press the “Save as” key
at the end of the measurement. The
following message appears: “No test
object selected!” Press the
ID key in order to enter the test object‘s ID. The softkey keyboard
appears.
If you enter an ID here which is not yet included i
n the database, a
prompt appears asking you if you want to enter a new test object.
– Se
lection : If you press , the display is switched to the SAVE
view. The ID appears with a green or orange background. Press
th
e save
key once again in order to complete the procedure.
– Se
lection : If you press , the database view appears (MEM
navigation). Go to the next page (Edit objects
2/3) by pressing
, and then enter a new test object. Press to this end. All
possible object types are displayed. P
ress “Device”. The newly
entered ID appears in red to the right of the ID parameter.
Acknowledge the entry by pressing the
key. The display is
switched to the database view (MEM
navigation). The newly
entered test object is displayed inversely in the structure. Press
MEM in order to return to the SAVE view. The ID appears with a
green background. Press the save
key once again in order
to complete the procedure.
– ESC: If you d
on’t want to save any measured values, press ESC
twice in order to go to the measuring view. If you press ESC
again, a prompt appears asking whether or not you want to
delete the measuring points in order to continue with the mea-
surement without saving.
7.1 Function Quick Edit – QEDIT 
(Option SECUTEST DB comfort and/or Feature KD01)
Each time you search for a test object ID in order to save mea-
surement results and it does not exist in the database yet,
Qui
ckEdit is available.
There are the following search options:
– via the ID softkey in the test
sequence (AutoTest) or in the
save menu of the manual test
– ID search via ID softkey on page 3 of 3 of memory manage-
ment MEM
– Reading in of a test object ID via the barcode or RFID scanner.
If the searched ID is not found, the fol
lowing question appears.
For creating a new object, you
can first of all choose between a
(standard) test object (symbol
) or a medical test object „new
ME device“ (symbol „Aesculapian staff
“) by pressing key (1).
1
2
If you have selected QEDIT (Quick Edit function), key (2) (shown
against a green background and not crossed out), you directly
proceed to the entry window of the memory management by
confirming with
in order to create a new test object and enter
further properties.
By confirming with , the position of the ID in the database is dis-
played. By pressing the Save key
once more, the measure-
ment results are saved to memory.