User Manual

82 GMC-I Messtechnik GmbH
14.4 Bluetooth Interface (SECUTEST PRO BT (comfort) or Feature M01)
The Bluetooth
®
interface is designed for the use of push-print
function, see section 10.8.
Menu Selection for Operating Parameters Page 3 of 3
PRINT
ESC
HELP
MEM
Setup 3/3
Bluetooth: menus for operating the Bluetooth
interface
Menu Selection for Operating Parameters Bluetooth
PRINT
ESC
HELP
MEM
Status: Activate/deactivate Bluetooth interface
Visibility*: Defines whether the test instrument can
be found by other Bluetooth devices.
Device name*: The name of the test instrument dis-
played above the interface can be modified here.
Device couplings*: Search / couple BT devices,
visualize/process existing couplings
* these sub-menus only appear if status is set to ON.
Menu Selection for Operating Parameters Bluetooth
PRINT
ESC
HELP
MEM
Search for Bluetooth
®
devices in proximity
Coupled device found
(white frame) > rename or delete
Not yet coupled device found
(blue frame) > entry of pairing PIN
Coupled device found
(blue frame) > rename or delete
Important Notes
• Status/visibility: For reasons of safety, we recommend deacti-
vating the Bluetooth interface if i
t is not required. The setting
„not visible“ does not make deactivation of the Bluetooth
interface redundant as invisible Bluetooth devices can actually
be localized with the appropriate means.
• Device coupl
ings which are not required for an extended period
of time should be deleted.
•The device name of the DUT has been
set at SECUTEST by
default. If you access one PC with several test instruments,
we advise you to supplement the name to facilitate assign-
ment: SECUTEST1, SECUTEST2, etc.
14.5 Remote Control Interface
(As from firmware version 1.6.0, feature KB01 or „Database
extension“ release required, which is liable to costs).
The measuring functions of the test instrument can be remote
contr
olled via the USB interface. In this case, the measured val-
ues are not shown on the display of the test instrument, but are
transmitted via the respective data interface.
The associated instruction set
is available on request.