User Manual

84 GMC-I Messtechnik GmbH
15 Repair and Replacement Parts Service
Calibration Center* and 
Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center 
Beuthener Straße 41 
90471 Nuremberg, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* DAkkS calibration laboratory for electrical quantities, registration no. 
D-K-15080-01-01, accredited per DIN EN ISO/IEC 17025 
Accredited quantities: direct voltage, direct current value, direct current
resistance, alternating voltage, alternating current value, AC active pow
-
er, AC apparent power, DC power, capacitance, frequency and tem-
perature
Competent Partner
GMC-I Messtechnik GmbH is certified per DIN EN ISO 9001.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (national accreditation body for the
Federal Republic of Germany) under registration number

D-K-15080-01-01 in accordance with DIN EN ISO/IEC 17025.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates right on up to
DAkkS calibration certificates. Our spectrum of offerings is
rounded out with free test equipment management.
An on-site DAkkS calibration station is an integral part of our ser-
vice department. If errors are discovered during calibration, our
specialized personnel are capable of completing repairs using
original replacement parts.
As a full service calibration laboratory, we can calibrate instru-
ments from other manufacturers as well.
16 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone: [phone]
Fax: [phone]
e-mail [e-mail]