User Manual

GMC-I Messtechnik GmbH 11
6 Temperature Simulation [°C / °F]
The temperature simulator is capable of simulating resistance
temperature detectors (RTD) or thermocouples (TC) with
specification of the external reference junction temperature.
➭ Connect the device to be calibrated with the measurement
cables.
➭ Select the Temp RTD or Temp TC calibration function with the
rotary switch.
➭ Switch the calibrator on by pressing the ON / OFF | LIGHT
key.
The last selected temperature sensor is displayed.
➭ Set the temperature value:
Simulated resistance or simulated voltage is applied directly to the
output!
Select the digit to be changed with the  keys, and change
the respectively selected digit with the keys. As an
alternative, press and hold the  keys with the cursor at
any entry position until the higher value digits are scrolled
through as well.
➭ The output can be deactivated with the OUT | ENTER key
[
out.off], or activated once again.
Selecting Resistance Temperature Detector (RTD) or Thermocouple (TC)
for the Fixed Value, Interval or Ramp Function
➭ Switch to the fixed value, interval or ramp function menu by
pressing the SELECT | ESC key.
➭ Select the [
select sensor] menu with the keys.
➭ Select the desired sensor with the  keys. Acknowledge
your selection with OUT | ENTER. The display is switched to
the window for temperature value entry, but the selected
sensor still appears in the auxiliary display.
Query internal reference temperature – Info menu.
info
batt 2.9 V ...tempinternal 23.7 °C
Parameter Entries for Thermocouple Temperature Simulation
Select unit of measure C or F – SEt menu.
info  set
time ...tempinternal
unitset °F °C
Select internal reference temperature – SEt menu.
info  set
time ...tempexternal
unitset temp set externa l internal 
temp internal23.7 °C
Select and set external reference temperature – SEt menu.
info  set
time ...tempinternal
unitset temp set intern al external
externalset 21.0 °C  
tempexternal 22.4 °C
CAL
SETUP
OUT
ENTER
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
CAL
SETUP
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
OUT
ENTER
CAL
SETUP
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
OUT
ENTER
OUT
ENTER
CAL
SETUP