User Manual

GMC-I Messtechnik GmbH 21
9 Device and Calibration Parameters
The instrument’s “SET” mode (menu mode) makes it possible to
set operating and measuring parameters, query information and
activate the interface.
➭ The menu mode is accessed by pressing the CAL | SETUP
key, assuming that the instrument is switched on and set to
“Measure” (measuring mode operation).
“inFo” appears at the display.
➭ The main “SET” menu can be accessed, after which the display
can be returned to the “inFo” menu, by repeatedly pressing the
  key (any direction).
➭ After selecting the desired main menu, sub-menus are
accessed by pressing the OUT | ENTER key.
➭ The desired parameter is selected by repeatedly pressing the
 key.
➭ In order to check or change a parameter, acknowledge it with
the OUT | ENTER key.
➭ The
  keys can be used to position the cursor at the entry
position.
The desired value is selected with the help of the
 keys.
➭ Changes can only be accepted with the OUT | ENTER key.
➭ You can return to the sub-menu without making any changes
by pressing the SELECT | ESC key, and to the main menu by
pressing the SELECT | ESC key once again etc.
➭ You can switch to the calibrating mode from any menu level by
pressing the CAL | SETUP key.
Example: Setting Time
inFo  set t iME
t iME set 14:11 :11 (hh:mm:ss)  
Setting hours and minutes:
  Advance to desired entry position.
 Change the setting, the entry position blinks.
Press and hold the key to change the setting rapidly.
The new time setting is activated after
acknowledgement.
Querying Operating Parameters – SETUP Menu > Info
inFo
bAtt  ...  1tEMP internal 24 . 2 ° C
Parameters: see section 9.1.
Setting Operating Parameters – SETUP Menu > Set
info  set time date addr irstb 
apoff unitset °F °C tempinternal / external
temp set intern external external set 24.2° C  
Parameters: see section 9.2.
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
OUT
ENTER
CAL
SETUP
OUT
ENTER
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
CAL
SETUP