User Manual

22 GMC-I Messtechnik GmbH
9.1 Querying Parameters – InFo Menu
bAtt – query battery voltage
inFo
bAtt 3.1 V.
tiME / dAtE – query date and time
inFo
bAtt  ...  02 . 01 . 2008 13:46:56
DD.MM.YYYY hh:mm:ss
D = day, M = month, Y = year, h = hour, m = minute, s = second
Date and time must be reentered after replacing the batteries.
cALdAt – query calibration date
inFo
bAtt  ...  caldat 02 . 01 . 08 uEr 0. . 04
ItEMP – query internal reference temperature and temperature unit of
measure
The temperature of the internal reference junction is measured
with a temperature sensor in close proximity to the input sockets.
inFo
bAtt  ...  1tEMP internal 24 . 2 ° C
9.2 Entering Parameters – SETUP Menu
tiME – set time
Entering the correct time makes it possible to calibrate in
real-time.
inFo  SET time
time set 10:24:24 (hh:mm:ss)  
Date and time must be reentered after replacing the batteries.
dAtE – enter date
Entering the current date makes it possible to calibrate in
real-time.
inFo
 SET time  dAtE
date set 02.01 (DD: day . MM: month)  wrs
year set 2008 (YYYY: year)  
Date and time must be reentered after replacing the batteries.
CAL
SETUP
OUT
ENTER
CAL
SETUP
OUT
ENTER
CAL
SETUP
OUT
ENTER
CAL
SETUP
OUT
ENTER
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
CAL
SETUP
OUT
ENTER
OUT
ENTER
OUT
ENTER
OUT
ENTER