User guide

Gossen Foto- und Lichtmesstechnik GmbH
4
4.4.2 „Mem“ – Storing measurement value in memory
The measurement value to be memorized is locked by the Hold key in the
display. By pressing the key Mem you will enter the value to be stored in
the next free memory location. An acoustic signal confirms „value stored in
memory“.
The display indicates the stored measurement value alternating with the
number of the memory location for a few seconds. Subsequently, the
MAVO-MONITOR will return to the measuring function. When the memory
is completely filled, the display will show „FLL“.
4.4.3 „Mem-Edit“ – Deleting a value in memory and entering a new value
The Mavolux offers the function „Mem Edit“ for correcting a value stored in
the memory. Measure again, press the Hold key and the new value is
locked. Then by pressing one of the range keys, you can browse through
the memory.
At the memory location to be corrected press now
the key Mem. An acoustic signal confirms „value
stored in memory“. In the display the measurement
value stored is indicated for a few seconds
alternating with the number of the memory
location. Subsequently the
MAVO-MONITOR will return to measuring
function.
Hold
Mem
Hold
Mem