User guide

Gossen Foto- und Lichtmesstechnik GmbH
5
4.4.4 „Mem Recall“ –Data memory Recall
Start in the function „Measuring“ and press the key Mem.
The last memory location filled will be indicated first.
Press one of the range keys to browse through the
data memory. The current memory location is
indicated in the display alternating with the
measurement value stored in the memory.
By pressing any one of the other keys or when for
about ten seconds no further memory data will be
recalled with the Range keys, the MAVO-
MONITOR will return to the measuring function.
4.4.5 „Mem-Clear“ – Clear memory
The MAVO-MONITOR must be in function „HOLD“.
When pressing simultaneously the Range keys, you clear the complete measuring data memory. The
cancelling is confirmed by an acoustic signal and three dashes in the display.
5 USB Port – Standard Software
The MAVO-MONITOR is equipped with a USB Port which allows the meter to be connected to a PC with
the USB cable (supplied).
The CD Rom supplied with the MAVO-MONITOR contains, among other information, a Standard Software
which allows you to start the PC operation immediately.
More details about the PC operational functions are also available on that CD-Rom.
6 Accessories
6.1 Standard Equipment
- Leather carrying case
- Battery
- Standard Software on CD-ROM
- USB-cable
- Instruction Manual
Mem