User Guide

Troubleshooting
20
Difficulty
closing
the lid
The seal gasket is not
well placed.
Floater valve is stuck.
Too Hot.
Place the seal gasket in
the proper position.
Check valve hole and push
anything blocking floater.
Wait until unit cools.
Difficulty
opening
the lid
Floater valve does not
drop after pressure
release.
Take off regulator knob
to release steam until the
floater valve drops, then
turn the lid to open it.
Steam
leaking
around the
lid
Seal gasket is not placed.
Food remains in the seal
gasket.
Damaged seal gasket.
The lid is not well placed.
Place the seal gasket.
Clean the seal gasket.
Replace the seal gasket.
Cover the lid according
to the directions (pg. 11).
Steam
leaking
around
floater
valve
Food remains in the floater
valve. The seal gasket of the
floater valve is worn out.
Remove the seal gasket
of the floater valve, clean
and replace.
Replace the seal gasket
of the floater valve.
Error Codes
E1 The pressure cooker has an abnormal sensor. For E1, please contact our
customer service department for further instruction.
E2 The pressure cooker’s sensor is not working properly. For E2, please
contact our customer service department for further instruction.
(continued on next page)
Problem Reason Solution