WPBULLET User Guide Mini-Bullets Weatherproof Wireless Speakers 1
TABLE OF CONTENTS Introduction..................................................................... 3 Contents........................................................................... 3 Component Identification . Transmitter................................................................... 4 . Speaker........................................................................ 5 Transmitter Set Up & Operation..................................... 6 Speaker Set Up & Operation....................................
INTRODUCTION The UHF Cordless Speaker System incorporates the latest RF technology to provide you with the ultimate in personal listening freedom as well as fine detailed sound. With this system, you can listen to TV, VCR, Stereo, Portable CD, iPod or MP3 Players at your own optimum volume level without trailing cables. The volume level can be individually adjusted for your left and right speaker. The system also features the latest ergonomic styling to match your existing audio/ visual equipment.
COMPONENT IDENTIFICATION Transmitter top 2 1 CHANNEL Channel Position Indicator Channel Select Button side Antenna 9V DC Input 3.5mm Audio Input 4 3.
COMPONENT IDENTIFICATION Speaker Receiver • Digital volume control (down/up) • On/Off button • Channel select button • Bass booster • LED mood light On/Off • Push the Power On/Off buttonfor2 seconds to power off the speaker. front Speaker Receiver • Unit operated by the12V AC/DC 500m Adaptor • Use caution when connecting or disconnecting the DC jack. • Each speaker can be operated by 8 AA batteries.
TRANSMITTER SET UP & OPERATION 1. Plug the transmitter AC/DC power adaptor into an AC outlet and connect the adaptor’s power output plug to the back of the transmitter marked DC9V. 2. Connect the audio connection cable to the AUDIO IN socket with the other end of the cord connected to your audio source (e.g. stereo system, TV system, etc.). You can use the provided 3.5 - 6.3 mm plug adaptor or 2-RCA phono-plug adaptor to suit the connection of your audio source. 3.
TROUBLE SHOOTING 1. Cannot connect transmitter to TV because TV has no headphone jack or audio output jack. If your TV has no audio output jacks, then it is probably not a stereo TV. In this case, connect the transmitter to the VCR (if you have a VCR connected to your TV). 2. Poor sound quality (Distortion). Distance between speaker and transmitter may be out of optimum range or transmission may be affected by interference.
WARNING • Ensure a minimum distance of 5cm around the speakers for sufficient ventilation. • Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspapers, table cloths, curtains, etc.. • Do not place open flame sources, such as lighted candles on the speakers. • Use the speakers only in moderate climates (not in tropical climates). • Do not expose the speakers to dripping or splashing.
TECHNICAL SPECIFICATIONS Transmission: 912 / 913 MHz FM stereo & PLL-circuit Operation Voltage Transmitter: 9V AC/DC adaptor 12V AC/DC adaptor Frequency response: 80Hz - 12KHz Range: up to 50m PROPOSITION 65 This product may contain chemicals listed in Proposition 65 that may be known to cause cancer, birth defects or other reproductive harm. For Proposition 65 please check (http:// www.oehha.ca.gov/prop65/prop65_list/Newlist.html) for details.
