Operating Guide

ManualsBrandsGraco ManualsAirless Paint SprayersProLTS 170 Electric Stationary Airless Paint Sprayer

Set Up

3A6419B EN 13

Set Up

Assemble Your Sprayer

1. Connect airless hose to airless hose

connection (P) on sprayer. Use wrench

to tighten securely.

2. Connect the other end of the hose to

the gun. Use two wrenches to tighten

securely to gun (see image below).

If hose is already connected, make sure

connections are tight.

3. Assure Spray Tip is properly inserted

into the Spray Tip Guard, and the Spray

Tip Guard assembly is tightened

securely to gun. See Spray Tip

Installation, page 21.

4. Perform the Pressure Relief

Procedure, page 14.