Operating Guide

Storage
3A6419B EN 29
4. Place drain tube in waste pail. Turn
pressure control to the START position.
5. ProX21 only:
Place Suction Tube in Pump Armor
fluid bottle. Turn Power Switch ON.
All other models:
While holding the Suction Tube above
the sprayer, pour approximately 2
ounces (1/4 cup) of Pump Armor into
Suction Tube and turn Power Switch
ON.
6. When Pump Armor is flushed through
the sprayer and out the Drain Tube,
turn Power Switch OFF. Replace and
tighten child-proof cap for storage.
7. Screw Inlet Screen back to Suction
Tube. Ensure that spray gun and hose
stay attached to sprayer.
8. Turn Spray/Prime Valve horizontal to
SPRAY position for storage.
9. Turn ON/OFF switch to OFF position.
Disconnect power (unplug power cord).
10. Secure a plastic bag around Suction
Tube and Drain Tube to catch any
drips.
ti27190a