Full Product Manual

Maintenance
20 3A3258J
Maintenance
Routine maintenance is important to ensure proper operation of your sprayer. Maintenance
includes performing routine actions which keep your sprayer in operation and prevent trouble
in the future.
Texture Hoses
Check hose for damage every time you
spray. Do not attempt to repair hose if hose
jacket or fittings are damaged. Do not use
hoses shorter than 25 ft (7.6 m).
Tips
• Always clean tips with a soft brush after
spraying.
• Tips may require replacement
depending on abrasiveness of texture.
Activity Interval
Inspect motor shield vents for blockage.
Daily or each time you spray
Check sprayer stall (RTX2000pi and RTX2500pi only).
With sprayer gun NOT triggered, sprayer motor should stall
and not restart until gun is triggered again.
If sprayer starts again with gun NOT triggered, inspect pump
for internal/external leaks and check prime valve for leaks.
Every 1000 gallons (3785
liters)
Protect the internal drive parts of this sprayer from water. Openings in shields allow cooling of
mechanical parts and electronics inside. If water gets into these openings, the sprayer could mal-
function or be permanently damaged.