Full Product Manual

Startup
3A4967E 15
2. Connect clear air hose to compressor
outlet and remote cup air inlet.
3. Connect 5 ft (1.5 m) fluid hose to remote
cup fluid outlet and gun fluid inlet.
NOTE: Gun must be setup for use with
remote cup.
4. Connect air hose (V) to inlet fitting of gun.
5. You are now ready to spray. Reference
Startup, page 16, and HVLP Edge II
gun manual, provided with sprayer, for
spraying instructions.
ti30896a
ti30897a
NOTICE
If the remote cup is accidentally tipped over
or held at too great of an angle, fluid may
leak into air regulator and cause damage.
Take precautions to avoid this. If fluid gets
into regulator, clean immediately.
ti30898a
V