Full Product Manual

Cup Over Installation
3A4967E 17
Cup Over Installation
1. Perform Pressure Relief Procedure,
page 10.
2. Disconnect gun from FlexLiner system.
Loosen nut on backside of gun. Do not
remove nut. Pull nozzle housing
assembly out just far enough to allow
rotation. Rotate nozzle housing
assembly 180° so it faces upward.
3. Loosen nut on backside of gun. Do not
remove nut. Pull nozzle housing
assembly out just far enough to allow
rotation. Rotate nozzle housing
assembly 180° so it faces upward.
ti30706a