Product Manual

Start Up
3A7656A 13
Flushing a New Sprayer
This sprayer arrives from the factory with a
small amount of test fluid in the system.
It is
important that you flush this fluid from the
sprayer before using it for the first time.
ti24640a
ti24651a
1. Perform Pressure Relief Procedure,
page 11.
2. Make certain ON/OFF Switch is OFF.
3. Place Suction Tube with Drain Tube in
grou
nded metal pail partially filled with
warm soapy water. See Grounding,
page 9.
4. Turn Prime/Spray Valve down to PRIME
posi
tion.
5. Plug power supply cord into a properly
grou
nded electrical outlet.