Product Manual

Start Up
14 3A7656A
6. Turn ON/OFF Switch to ON position.
7. Turn Pressure Control Knob to
Prime/Slow to start motor.
8. When sprayer starts pumping, water and
air bubbles will be purged from the
system. Allow fluid to flow out of drain
tube for 1 to 3 minutes.
9. Turn ON/OFF Switch to OFF position.
Fill Pump
1. Turn Pressure Control Knob to lowest
setting.
2. Turn ON/OFF Switch to ON position.
3. Place Suction Tube in pail of
disi
nfectant. Place Drain Tube in waste
bucket.
4. Turn Pressure Control Knob to Prime/
Slow to start motor. Wait until disinfectant
flows from the Drain Tube.
5. Turn ON/OFF Switch to OFF position.