Product Manual

Cleanup
18 3A7656A
Cleanup
Cleaning the sprayer is required after each
use to remove any disinfectants and residues
from the sprayer. It will also help ensure a
trouble free start up the next time the sprayer
is used.
NOTICE
1. Perform Pressure Relief Procedure,
page 11.
2. Remove Spray Tip Guard and Spray Tip.
For additional information, see Clean
the Gun, page 21.
Clean Drain Tube
ti24709a
ti24710a
3. Remove Suction Tube and Drain Tube
from pail of disinfectant, wipe excess
disinfectant off outside.
4. Place Suction Tube in bucket of warm
soapy water. Place Drain Tube in waste
bucket. For disinfectants with alcohol
active ingredients, ground the bucket
according to Grounding, page 9.
Use only water for cleaning.
Clean in a well-ventilated area. Keep a
good supply of fresh air moving through
the area.
Disinfectant left in sprayer will damage the
sprayer. To avoid damage, always
completely flush with warm soapy water
after every use. See
Cleanup , page 18. Do
not store sprayer with disinfectant in it.