Product Manual

Maintenance
22 3A7656A
Maintenance
Routine maintenance is important to ensure
proper operation of your sprayer.
Perform Pressure Relief Procedure, page
11, before performing maintenance.
Activity Interval
Inspect/clean Inlet Strainer.
Daily or each time you spray
Inspect motor shield vents for blockage.
Daily or each time you spray
Check sprayer stall.
With Spray Gun NOT triggered, sprayer motor should stall
and not restart until Spray Gun is triggered again.
If sprayer starts again with Spray Gun NOT triggered,
inspect Pump for internal/external leaks and check
Prime/Spray Valve for leaks.
Every 1000 gallons (3785 liters)
Throat packing adjustment
When Pump packing begins to leak after extended use,
tighten packing nut down until leakage stops or lessens.
This allows approximately 100 gallons of additional
operation before a repacking is required. Packing nut can
be tightened without O-ring removal.
As necessary based on usage