User's Manual

ManualsBrandsGraco ManualsFiltersGraco 307282G - Low Pressure Medium Volume red alert Filters

Instructions–Parts List

307282G

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

03708

LOW PRESSURE, MEDIUM VOLUME

“red alert” Filters

Filters fluids and indicates when filter requires cleaning.

300 psi (21 bar) Maximum Working Pressure

6 gpm (22 liter/min) Flow Capacity

36 sq. in. (230 cm

) Filtering Area

Model No. 213057, 30 mesh (590 micron) element

Model No. 213058, 60 mesh (250 micron) element

Model No. 213059, 100 mesh (149 micron) element

Model No. 213060, 150 mesh (95 micron) element

Model No. 213061, 200 mesh (74 micron) element

Model No. 214001, without element

Summary of content (6 pages)

PAGE 1
Instructions–Parts List LOW PRESSURE, MEDIUM VOLUME “red alert” Filters 307282G Filters fluids and indicates when filter requires cleaning. 300 psi (21 bar) Maximum Working Pressure 6 gpm (22 liter/min) Flow Capacity 36 sq. in. (230 cm 2) Filtering Area Model Model Model Model Model Model No. 213057, 30 mesh (590 micron) element No. 213058, 60 mesh (250 micron) element No. 213059, 100 mesh (149 micron) element No. 213060, 150 mesh (95 micron) element No. 213061, 200 mesh (74 micron) element No.
PAGE 2
Installation To clean or service the filter without shutting down the system, install a dual filter or a filter bypass system as explained below. The numbers and letters in parentheses refer to Figs. 1, 2, and 3 and the Parts Drawing. Accessories and Technical Data are on the front page. NOTE: Allow 3 in. (76 mm) minimum clearance below the filter for easy removal of the bowl (9).
PAGE 3
Service CAUTION If the filter will not be used for a while, thoroughly clean all the parts in solvent and blow them dry before the paint dries and clogs the filter. To help prevent damaging the parts, do not clean them with a wire brush or sharp object. Indicator The indicator provides gradual warning of a dirty element. When the indicator shows 3/4 red, clean the element. If not cleaned promptly, the filter bypass valve opens and fluid will not be filtered.
PAGE 4
Parts Model No. 213057 to 213061 Includes items 1 to 10. Model No. 214001 Includes items 1 to 6, 8 to 10; Order the filter element separately from those listed under Ref. No. 7. Ref. No. Part No. Description Qty.
PAGE 5
Accessories CV75 Indicator O-Ring 116768 For use with materials not compatible with the standard fluoroelastomer indicator o-ring PTFE Housing O-Ring 102857 For use with materials not compatible with the standard fluoroelastomer o-ring Drain Valve 208392 500 psi (34) Maximum Working Pressure 1/4 npt(m) x 3/8 npt(f). PTFE seal. For relieving fluid pressure in the filter. Technical Data Maximum Working Pressure . . . . . . . . 300 psi (22 bar) Flow Capacity . . . . . . . . . . . . . . . . .
PAGE 6
The Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.