User's Manual

ManualsBrandsGraco ManualsAutomatic Lubrication SystemsGraco 312738C Electric and 10:1 DynaStar Pumps: 120# and 400#

Instructions

Dyna-Star

HP, HF, 10:1

Pumps: 120# and 400#

Drum Cover and Follower

Plate

312738C

Drum Cover and Follower Plate for use with Dyna-Star 10:1, HP, or HF Pumps. For

professional use only.

Drum Cover Models

Follower Plate Models

To reduce the risk of serious bodily injury, including

splashing fluid in the eyes or on the skin and injury

from moving parts, ALWAYS follow the pressure

relief procedure in the separate pump manual

before you install any of these components when you

change the drum.

Important Safety Instructions

Read all warnings and instructions in this

manual and in the Dyna-Star Pump HP, HF or

10:1 instruction manual. Save all instructions.

Model Number

Compatible Refinery

Drum Size

Compatible Dyna-Star Pump

10:1 HP HF

247443 120 lb. 247443 NA NA

247704 400 lb. 247450 NA NA

77X514 120 lb. NA 77X002 77X015

77X515 400 lb. NA 77X003 77X016

Model Number

Compatible Refinery

Drum Size

Compatible Dyna-Star Pump

10:1 HP HF

247701 120 lb. 247443 NA 77X015, 77X121

247702 400 lb. 247450 NA 77X016, 77X122

77X511 120 lb. NA 77X002, 77X111 NA

77X512 400 lb. NA 77X003, 77X112 NA

Summary of content (8 pages)

PAGE 1
Instructions Dyna-Star® HP, HF, 10:1 Pumps: 120# and 400# Drum Cover and Follower Plate 312738C EN Drum Cover and Follower Plate for use with Dyna-Star 10:1, HP, or HF Pumps. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual and in the Dyna-Star Pump HP, HF or 10:1 instruction manual. Save all instructions.
PAGE 2
Follower Plate Installation Follower Plate Installation Instructions 4. Press follower plate, cone side up, into grease and firmly press on it to remove all air pockets NOTE: Before the follower plate is installed in the drum of grease, pack cone with grease. NOTE: See Parts, page 5 and 6 for illustrations showing cone side up position. 5. Push down on follower plate cylinder (6) until grease starts to appear in pump opening at follower plate grommet (11). See Parts, pages 5 and 6. 1.
PAGE 3
Drum Cover Installation Drum Cover Installation 1. HP and HF Models Only: Remove bolts (128) and shroud (126) from pump. 3. Place drum cover (1) on drum (a). For 120 pound models only, tighten thumb screws (6) securely) (FIG. 3). 1 6 128 126 FIG. 2 2. Remove screws (4) and washers (5) from drum cover (1) (FIG. 3). Save these parts. They will be reused to secure the pump to the drum cover for reassembly. 247703 and 77X514 - 120 pound model a FIG. 4: 120 Pound Cover Shown 4 4.
PAGE 4
Drum Cover Installation 6. Align holes in pump base with holes in drum cover (1) (FIG. 6). Securely fasten pump to drum cover using screws (4) and washers (5) removed in Step 2, page 3. 4 5 FIG. 6 7. HP and HF Models Only: Reinstall shroud (126) using bolts (128) (FIG. 7). Use a wrench to tighten bolts securely. 128 126 FIG.
PAGE 5
Parts Parts Part No. 247701 and 77X511, Follower Plate for 120# Reservoirs Ref. No. 6 13 1 7 2 Part No. Description 1 2 3 4 5 6 7 103833 121327 121328 121329 15R717 15R719 121209 8 9 10 11 183243 220652 15R716 186104 11 16V328 3 5 12 13 4 1 108714 183245 Qty.
PAGE 6
Parts Part No. 247702 and 77X512, Follower Plate for 400# Reservoirs 6 11 2 12 9 8 7 13 3 5 4 10 1 Ref. No. 1 2 3 4 5 6 7 103833 121327 121328 121329 15R717 15R719 247709 8 9 10 11 186463 161288 15R716 186104 16V328 12 13 6 Qty .
PAGE 7
Parts Part No. 247703 and 77X514 Part No. 247704 and 77X515 Drum Cover for Dyna-Star 120# Grease Pump Drum Cover for Dyna-Star 400# Grease Pump Ref. No. Part No. Description 1 3 4 5 6 7 COVER, drum 15M442 GASKET, pump SCREW, cap, hex hd, model 100057 247703 102962 SCREW, cap, model 77X514 100214 WASHER, lock 101518 SCREW, thumb STRIP, neoprene, sponge, 3-1/2 070148 ft. (not shown) Qty. 1 1 4 4 4 3 Ref. No. Part No. Description 1 3 4 5 Qty.
PAGE 8
Graco Information For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590 All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents.