User Manual

7 Moving
UAS
93
2. Unsnap Bottom Seat Pad to Expose
the UAS Strap
3. Pull UAS Connectors Out of the Belt
Path Openings into the Center of the
Car Seat
4. Slide Entire UAS Strap Along Bar to
the Desired Belt Path Openings
Rear-Facing: Slide UAS strap along bar to
the front of the seat.
Forward-Facing with Built in Harness:
Slide the UAS strap up along bar to the top.
Rear-
Facing
Forward-
Facing
5. Push the UAS Connectors Out
Through the Desired Belt Path
Openings on Each Side of Car Seat
Rear-Facing: Make
sure the UAS strap or
vehicle belt is in front of
the buckle strap when the
buckle is in the inner-
most position (A), and in
behind when in the outer-most position (B) and
that it is flat and is not twisted.
Forward-Facing: Make
sure the UAS strap or
vehicle belt is routed
behind the harness
strap, is flat, and is not
twisted.
A B