User's Manual

16 750000-INS-LAB-RevC11
MAINTENANCE
CLEANING
Perform the following cleaning procedures before use.
Pump: Wipe the pump with a clean, damp cloth and mild
detergent, and keep it away from dust. Air dry.
s NOTICE:Donotusephenolicproductsorcorrosive
orpowderedcleanserstocleanthepump.
s NOTICE:Donotimmerseorsoakthepump.
Mattress: Wipe the mattress unit with a clean, damp cloth
and mild detergent. The mattress may also be cleaned
using a 10% solution of sodium hypochlorite (bleach)
diluted in water. Air dry all parts thoroughly before use.
s NOTICE:Donotusephenolicproductstocleanthe
mattress.
s NOTICE:Aftercleaning,airdrythemattresswithout
directexposuretosunlight.
GENERAL MAINTENANCE
1. Check main power cord and plug for abrasion or
excessive wear.
2. Check mattress cover for signs of wear or damage.
Ensure mattress cover and tubes are connected
correctly.
3. Check airow from the air hose connector. The airow
should alternate between each connector every half-
cycle time if it’s in alternating mode.
4. Check the air hoses for any kink or break. For
replacement, please contact your GF equipment
provider.